Описание

  • Easy sensor configuration using the IO-Link interface
  • Innovative ASIC circuit technology
  • Integrated error display and error output
  • Minimal mounting clearance thanks to wenglor weproTec
The Inductive Sensors have not only been equipped with ASIC, but rather with an IO-Link interface as well for ideal integration into networks. As a result, a total of three switching distances and two switching frequencies can be selected, and PNP/NPN as well as NO/NC/antivalent options can be set as desired. This reduces the number of variants while simultaneously expanding the scope of functions.
Switching Distance 6 mm
Standard Target 18 ? 18 mm
Correction Factors Stainless Steel V2A/CuZn/Al 1,01/0,59/0,55
Mounting non-flush
Mounting A/B/C/D in mm 8/25/18/12
Mounting B1 in mm 0...7
Switching Hysteresis < 10 %
Electrical Data
Supply Voltage 10...30 V DC
Supply Voltage with IO-Link 18...30 V DC
Current Consumption (Ub = 24 V) < 11 mA
Switching Frequency 750 Hz
Temperature Drift < 10 %
Temperature Range -40...80 °C
Switching Output Voltage Drop < 1 V
Switching Output/Switching Current 150 mA
Residual Current Switching Output < 100 µA
Short Circuit Protection yes
Reverse Polarity and Overload Protection yes
Interface IO-Link V1.1
Protection Class III
Mechanical Data
Housing Material CuZn, nickel-plated
Degree of Protection IP67
Connection M12 ? 1, 4-pin
Safety-relevant Data
MTTFd (EN ISO 13849-1) 3706,54 a
Function
Error Indicator yes
Programmable switching distance 4/5/6 mm
Programmable switching frequency yes
Output
IO-Link yes
Switchable to NC/NO yes
Configurable as PNP/NPN/Push-Pull yes
Error Output yes
''